How To Do Blinds Step by Step Guide

Paint roller

1. Calculate how many windows are you going to put blinds and measure the height of each one. Be sure of also have each side of the window.

2. The design you use may be different, but here we are using two wood 1 "for 8" (2.54 cm x20.32 cm) set by two wood 1 "for 3" (2.54 cm x 7.62 cm) for each shutter. This means that each window will have four of 1 "for 8" (2.54 cm x 20.32 cm) accompanying each one and four 1 "for 3" (2.54 cm x 7.62 cm) per window. You can also use other designs with the same basic idea.

3. Calculate how many feet of lumber you need and buy enough wood that are straight and without knots to build the blinds.

4. Cut all wood according to length and sand the edges by hand until they are rounded.

5. Painted with primer on all sides of timber to prevent deterioration. This will need two layers. After the primer dries you can put the blinds

6. Each blind will have 8 screws, two for each wood, and 1 "for 3" (2.54 cm x 7.62 cm).After the blinds are assembled you can cut designs on them if you wish (forms of the moon, etc...).

7. Paint the blinds with your favorite color and install them. When you paint try to don't gush the wood.